Russian maker of engineering plastics
Engineering plasticsinstead of metal
We make parts from our own compounds from one piece to series and supply granules and filament in batches from 25 kg. Open-chamber printing, no warping.
- 236 MPa
- flexural strength
PPA-GF30 - 0.22%
- shrinkage: large parts
without warping - ≤ 30 days
- batch delivery
of material - >95%
- Russian raw materials
in our compounds
Why it matters
A metal part takes
too long and costs too much
Machining, tooling and weeks of waiting for a handful of parts
A part in engineering plastic within days, from one piece, no tooling
The imported part or material is unavailable or several times pricier
Our own compounds made in Russia, over 95% Russian raw materials
Large parts warp and need an expensive printer with a heated chamber
Our composites print in an open chamber, shrinkage 0.22–0.27%
Print settings and properties have to be guessed
Technical data sheet, safety data sheet and print settings with every batch
Materials
Compounds for parts
that used to be metal
All materials M-Shape 3D-X
UV-resistant
Outdoor parts exposed to sunlight: covers, guards, brackets
- Flexural strength170 MPa
- Flexural modulus5 570 MPa
- Charpy notched impact4,2 kJ/m²
Granules, per kg2 200 ₽ – 4 300 ₽
PPA-GF30
polyphthalamide with 30% glass fibre
Strongest Load-bearing parts instead of metal, tooling for composite moulding
- Модуль при растяжении8 370 MPa
- Flexural strength236 MPa
- Flexural modulus8 458 MPa
Granules, per kg2 100 ₽ – 4 200 ₽
M-Shape 3D-X FR
UV-resistant, flame-retardant, V-0 (GOST 28157)
V-0 Parts with fire-safety requirements: transport, electrical, oil and fuel units
- Модуль при растяжении4 190 MPa
- Flexural strength160 MPa
- Flexural modulus5 530 MPa
Granules, per kg2 400 ₽ – 4 700 ₽
Free support included:
we share print settings
for your printer.
Print on FDM and FGF printers, in open and closed chambers.
Tested on: Bambu Lab, Creality, Picaso 3D, Qidi, Sovol, Stereotech, F2.
Tested to GOST 9550
Flexural strength
of our plastics
In-house and independent lab tests. Full property tables are open on the grade pages – no PDF, no sign-up.
Compare all gradesHow to work with us
A finished part
or material in batches
You need a part
- from one piece to series, no tooling
- quote from a .stp or .stl model in 1–2 business days
- material chosen for load, temperature and environment
- metal parts in series – by MIM
You need materials
- granules from 25 kg, filament from 10 kg
- serial supply from 100 kg, price drops with volume
- delivery within 30 days, TDS and settings included
Prices
Price your batch:
the bigger, the cheaper per kg
All grades and prices – per kg
Total: –
excl. VAT (Skolkovo participant). Final price confirmed in the quote.
Free support included:
we share print settings
for your printer.
Cases
Parts already
working in production
All cases
Gear for a bottling line
Capper cam drive gear
M-Shape 3D-X, филамент · Capper drive on a bottling line. Settings: nozzle 260 °C, bed 75 °C, unheated chamber, 70–90 mm/s.
Engine cover for a cargo octocopter
Engine cover
M-Shape 3D-X · The cover sits by the engine and must withstand high temperatures. The aircraft is for logistics and emergency medicine.
Russian pellet 3D printer
listed under Decree No. 719
The M-Shape 200 desktop printer qualifies for procurement requiring Russian origin. It prints plastic, metal and ceramic granules with M-Shape MEX 3D technology.
Process
From task to quote:
15 minutes of your time
- 01
You send a model
A .stp or .stl model, operating conditions and volume. Drawings or specs only if the project is early and you want advice.
- 02
We choose the material
An engineer matches load, temperature and environment to grade properties. 1–2 business days.
- 03
We send a quote
Price, lead time, TDS and print settings. Before a series you can order a trial batch from 10 kg or a trial part.
Trusted by
We work with industry,
research and state corporations
























«Following pilot work, the 17-4PH steel filament performed well. Laboratory tests confirm the technology can be used in production alongside conventional methods.»

«The pellet 3D printer and MIM granules noticeably cut part costs, and the quality of functional parts fully meets our requirements.»
«We came with a task: a UAV engine cover that must withstand high temperatures. M-Shape proposed M-Shape 3D-X for our spec and explained why. Done fast: accurate geometry and good surface quality.»

«Our calculations show this solution is 4 times cheaper than SLM metal printing.»
FAQ
Frequently asked
about materials and parts
Can plastic replace a metal part?
Yes, if the load and temperature fit the material properties. For example, PPA-GF30 has a flexural strength of 236 MPa and a modulus of 8.5 GPa. We check the part against its operating conditions before you order and tell you honestly when metal should stay.
Will your material print on our printer?
Yes. M-Shape compounds print on FDM and FGF printers, including open-chamber machines, and on an unheated bed for FGF. Tested on Bambu Lab, Creality, Picaso 3D, Qidi, Sovol, Stereotech, F2. Print settings come with the batch.
What is the minimum order?
Granules from 25 kg, filament from 10 kg. Serial supply from 100 kg: the price per kg drops almost 2 times with volume.
How fast is delivery?
Materials ship within 30 days.
Do you make parts yourselves?
Yes, from one piece to series, from our own compounds. Send a 3D model in .stp or .stl and tell us where the part works – we quote price and lead time in 1–2 business days. A drawing or spec is optional.
Which documents come with a batch?
Specification, safety data sheet, technical data sheet and GOST test reports. Prices exclude VAT: M-Shape is a Skolkovo participant and is VAT-exempt.
Can you develop a material for our requirements?
Yes. We select the polymer and filler for load, temperature, flammability, oil and UV resistance and work out print settings. That is how M-Shape 3D-X FR (V-0) and our RF-shielding material came about.
Send us a model –
we will suggest material and price
We reply within one business day. A .stp or .stl file and a couple of words about where the part works is enough.